sub banner

Your Position:Home>

CS Series Cone Crusher

CS Series Cone Crusher

CS Series Cone Crusher

Capacity:10-600tph

Feeding size:less than 300mm

Application:Iron stone, non-ferrou metal ore, granite, limestone, quartzite, sandstone, cobble etc.

TEL: 0086-21-60273583     SKYPE: pioneercrusher

Products with parameters

CS Series Cone Crusher introduction:

CS Series Cone Crusher concentrates on the specialty of high-frequency, optimization of cavity and reasonable impact. It is based on the conceptions of laminated crushing principle and more crushing and less grinding. It is researched and designed by our company, according to the customers’ requirement. This CS Series Cone Crusher is widely used to crush metalliferous and non-metalliferous ores, cement, construction and sand. The materials can be iron stone, non-ferrou metal ore, granite, limestone, quartzite, sandstone, cobble , etc

 

Working principle of CS cone crusher
When CS series cone crusher is working, the motor drives the eccentric ring spin through V-belt, big belt wheel, transmission shaft, big bevel gear and small bevel gear. The crushing cone spins by the force of eccentric ring, which makes the crushing wall approach and leave rolling mortar wall to and fro, so the materials get impacted and broken in the crushing chamber formed by fixed cone and movable cone. The materials were discharged from the bottom after several times’ break until they get the required grade.

 

Specification of High Quality clay CS Series Cone Crusher Equipment ( cs cone crusher)

Model Dia. mm (inch) Cavity Feed Opeing Outlet Setting (mm) Shaft Speed (r/min) Power (kw) Capacity (t/h) Weight (t) Dimension (mm)
Closing Side (mm) Open Side (mm)
CSB75 900 (3’) Fine 83 102 9-22 580 75 45-91 15 2821×1880×2164
Coarse 159 175 13-38 59-163
CSB110 1200 (4’) Fine 127 131 9-31 485 110 63-188 20 2821×1974×2651
Medium 156 156 13-38 100-200
Coarse 178 191 19-51 141-308
CSB160 1295 (4 1/4’) Fine 109 137 13-31 485 160 109-181 27 2800×2342×2668
Medium 188 210 16-38 132-253
Coarse 216 241 19-51 172-349
CSB220 1650 (5 1/2’) Fine 188 209 16-38 485 220 181-327 55 3911×2870×3771
Medium 213 241 22-51 258-417
Coarse 241 268 25-64 299-635
CSB315 2134 (7’) Fine 253 278 19-38 435 315 381-726 110 4613×3251×4732
Medium 303 334 25-51 608-998
Coarse 334 369 31-64 789-1270

Standard head type

Model Dia. mm (inch) Cavity Feed Opeing Outlet Setting (mm) Shaft Speed (r/min) Power (kw) Capacity (t/hour) Weight (t) Dimension (mm)
Closing Side (mm) Open Side (mm)
CSD75 914 (3’) Fine 13 41 3-13 580 75 27-90 15 2821×1880×2410
Coarse 33 60 3-16 27-100
CSD110 1218 (4’) Fine 29 57 5-16 485 110 50-132 20 2560×1942×2928
Medium 44 73 10-16 90-145
Coarse 56 89 13-19 141-181
CSD160 1295 (4 1/4’) Fine 29 64 3-16 485 160 36-163 27 2800×2342×2668
Medium 54 89 6-16 82-163
Coarse 70 105 10-25 109-227
CSD220 1676 (5 1/2’) Fine 35 70 5-13 485 220 90-209 55 3917×2870×3771
Medium 54 89 6-19 136-281
Coarse 98 133 10-25 190-336
CSD315 2134 (7’) Fine 51 105 5-16 435 315 190-408 110 4130×3251×4454
Medium 95 133 10-19 354-508
Coarse 127 178 13-25 454-599

 

If you have any question, please write it down, we will reply to you within 24 hours!