sub banner

Your Position:Home>

European Coarse Hammer Mill

European Coarse Hammer Mill

European Coarse Hammer Mill

Capacity:15-100t/h

Feeding size:20-50mm

Application: metallurgy, construction, chemical and other industries, also widely used to produce concrete, limestone, raw coal, silicon carbide, gangue, sand, refractory materials and ceramic, etc.

TEL: 0086-21-60273583     SKYPE: pioneercrusher

Products with parameters

Product Description of  European Coarse Hammer Mill

European Coarse Hammer Mill is widely used in metallurgy, construction, chemical and other industries, also widely used to produce concrete, limestone, raw coal, silicon carbide, gangue, sand, refractory materials and ceramic, etc. It is ideally suitable for primary, secondary and fine crushing. The largest compression resistance of all kinds of soft and hard ore to be crushed is 320 MPa.

 

Working Principle of European Coarse Hammer Mill
European Coarse Hammer Mill is mainly made up of main case, rotor, impact plate and grate. The main case consists of two parts and is welded by cutting steel plates, and the others are connected with bolts. There are high manganese steel liners embedded in the main case, which is convenient to be replaced after wearing. Several uniform weight blow bars are installed on its spindle and are all tightened by highly strengthen bolts. The main engine drives spindle through motor and v-belt, which makes the rotor do movement to and fro, large rocks go into the crushing cavity from feeding opening and then be crushed by high speed moving blow bar. Crushed qualified materials are discharged from the interval between grates at the bottom, while the unqualified are still kept in the crushing cavity, crushed by rotor and blow bar repeatedly till they meet the established requirements. To avoid jams, the water content of materials to be crushed is not more than 20% generally.

 

Features of European Coarse Hammer Mill

  1. High productive capacity, large crushing ratio.
  2. Low power consumption, cubical final product size.
  3. Simple mechanical structure, compact and convenient.
  4. Less investment costs, convenient to manage.

 

Technical Data of Coarse Hammer mill 

Model PC4008-75 PC4012-90 PC4015-132
Diameter Of Rotor 750 900 1150
Length Of Rotor 800 1200 1500
Speed Of Rotor 800-1000 800-1000 550-800
Feeding Opening 320×930 400×1200 500×1500
Max feeding Size <30 <40 <50
Discharge Size 0-3 0-3 0-8
Capacity (t/h) 15-30 30-60 60-100
Power (KW) 75 90 132
Dimension(L×W×H)(mm) 2130×1665×1610 2840×2100×2020 3720×2650×2540

 

If you have any question, please write it down, we will reply to you within 24 hours!