sub banner

Your Position:Home>

Rotary Dryer

Rotary Dryer

Rotary Dryer

Capacity:0.5-50t/h

Feeding size:

Application:Such as the sand ,coal ,flyash ,coal powder ,coal slurry ,sawdust ,coal ash ,gypsum, vinasse ,clay,all kinds of mineral stone , animal manure , wood sawdust, about several hundred material .

TEL: 0086-21-60273583     SKYPE: pioneercrusher

Products with parameters

Brief introduction of rotary dryer

Rotary dryer is suitable to dry metallic and nonmetallic mineral, clay in cement industry and coal in coal mine, etc.  Rotary dryer can be widely used to dry various materials, and it is simple to be operated.

 

Working principle of rotary dryer
Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator.  The barrel is installed with slope to horizontal line.  Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together.  Materials go to the lower side by gravity when the barrel rotates.  Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely.  So drying efficiency is improved.

 

rotary dryer

rotary dryer

 

Feature of rotary dryer

High heat transfer coefficient and high thermal efficiency
• Large treatment capability, wide application
• Well drying effect
• Indirect-heating, no material contamination
• Retention time can be adjusted, low energy consumption
• Convenient operation and easy maintenance

 

Technical parameters of rotary dryer

Model (mm) Obliquity(%) Rotation speed (r/min) Feeding temperature (degree) Power (kw) Capacity(t/h) Weight (t)
600×6000 3-5 3-8 <=700 3 0.5-1.5 2.9
800×8000 3-5 3-8 <=700 4 0.8-2.0 3.5
800×10000 3-5 3-8 <=700 4 0.8-2.5 4.5
1000×10000 3-5 3-8 <=700 5.5 1.0-3.5 5.6
1200×10000 3-5 3-8 <=700 7.5 1.8-5 14.5
1200×12000 3-5 3-8 <=700 11 2-6 14.8
1500×12000 3-5 2-6 <=800 15 3.5-9 17.8
1800×12000 3-5 2-6 <=800 18 5-12 25
2200×12000 3-5 1.5-6 <=800 18.5 6-15 33
2200×18000 3-5 1.5-6 <=800 22 10-18 53.8
2200×20000 3-5 1.5-6 <=800 30 12-20 56
2400×20000 3-5 1.5-5 <=800 37 18-30 60
3000×20000 3-5 1.5-5 <=800 55 25-35 78
3000×25000 3-5 1.5-5 <=800 75 32-40 104.9

 

Next page:

Previous page:

If you have any question, please write it down, we will reply to you within 24 hours!